A Complete front Disc Brake Kit Ready To Bolt On
BREKT00627 is a Brembo OE front disc brake kit for your vehicle. The kit pairs matched rotors and pads in one box so the whole front axle gets fresh components broken in together.
Complete disc brake kit including rotors and pads for direct OE replacement.
Key Features
- Matched rotor and pad set in one kit
- OE Equivalent rotor geometry paired with Brembo pad compound
- Direct bolt-on replacement, no modification required
- Everything needed for a complete axle brake job in one box
Fitment
| Year Range | Make | Model |
|---|---|---|
| Application specific | Contact for confirmation | Confirm exact vehicle application before ordering |
Specifications
| Detail | Value |
|---|---|
| Part Number | BREKT00627 |
| Brand | Brembo |
| Position | Front |
| UPC | Not published by manufacturer |
What’s Included
- 1x Brembo BREKT00627 front disc brake kit (rotors and pads)
About Brembo
Brembo has manufactured braking systems in Italy since 1961, supplying OE braking components to major automakers as well as aftermarket rotors, pads, and kits engineered to original specification.
What is the BREKT00627?
The BREKT00627 is a Brembo OE front disc brake kit for your vehicle, including matched rotors and pads.
Is this a direct OE replacement?
Yes, this part is engineered to Brembo OE Equivalent specification for a direct bolt-on fit.
What does this kit include?
This kit includes matched rotors and pads for a complete axle brake job.
Do I need to buy pads separately?
No, pads are included in this kit alongside the rotors.
Can I reuse my old hardware with this kit?
Inspect factory brake hardware and calipers, and replace any worn hardware separately if needed.
Will this part fit a vehicle not listed in the fitment table?
Confirm your exact year, make, model, and trim against the fitment table before ordering, since brake components vary by trim and factory brake package.
Does Brembo provide a warranty on this part?
Brembo backs its OE and OE Equivalent parts with a manufacturer warranty against defects in material and workmanship.
Can I mix this part with a different brand on the opposite side?
Brembo recommends replacing components in axle pairs using matched parts for consistent braking performance.
Is professional installation required?
Brake work should be performed by a qualified technician or an experienced installer familiar with brake system service.
Install Instructions
- Raise and safely support the vehicle, then remove the wheel
- Remove the caliper, caliper bracket, and old rotor
- Clean the hub surface and mount the new rotor from the kit
- Install the new pads from the kit into the caliper bracket
- Reinstall the caliper bracket and caliper
- Reinstall the wheel and torque to vehicle specification, then bed in the new components
