DETAILS
Dobinsons 75mm MRA Height Adjustable Lift Kit to suit Ford Ranger RA / Next Gen 4×4 Single Cab 2022-Onwards
CRITICAL FITMENT NOTICEUCA COMPATIBILITYTo ensure correct fitment, you must inspect your factory Upper Control Arms before placing an order. Your vehicle may be fitted with either alloy or steel knuckles, and these require different UCAs.
How to identify your knuckle type:Steel Knuckle:Rougher, darker finishCommon on MY23 Ranger XL / XLS
Alloy KnuckleSmoother, lighter finishFound on MY23 Ranger XLT / Sport / Wildtrak / Platinum and most Everest variants
These parts are not interchangeable. By purchasing, you acknowledge that you have checked your vehicle and selected the correct option.
NOTE:– This is for the 4×4 Single Cab model ONLY.– A Diff Drop is required at 75mm and above.– A 100mm Liftmay beachievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.
Type: RangerModel: RA / Next GenYear: 2022 –Suspension Type: Coil Spring Front / Leaf Spring RearFront Lift: 75mm LiftRear Lift: 40mm – 45mm LiftDetail: – 4×4 Single Cab Models– Monotube Remote Reservoir Shock Absorbers– Front shocks come pre-assembled for ease of installation.
COMPONENTS
Front:2x Dobinsons MRA Front Shocks – MRA19-A1081x Pair Dobinsons Front Springs2x Dobinsons Strut Mounts – SC19-0151x Pair Trundles Upper Control Arms1x Trundles Diff Drop Kit –DDRAN-03
Rear:2x Dobinsons MRA Rear Shocks – MRA19-A1092x Dobinsons Rear Leaf Springs1x Dobinsons Leaf Bush Kit – PB19-1104K2x Dobinsons U-Bolt Kit – UB19-473K
EXTRAS
Dobinsons Shackle Kit – SK19-058Dobinsons Shackle Pin – SP59-060
Note: If you require fitting instructions for the MRA19-A108 shock, pleaseclick here
