DETAILS
Dobinsons Basic MRA Height Adjustable Lift Kit to suit Mitsubishi Triton ML/MN 2006-2015
Note: Due to the Triton’s limited suspension geometry, upper control arms MUST be added. Going above50mm may also require extended length to be modified on a case by case basis.
When Fitting Raised Suspension, a Tailshaft Spacer is Required to Align the Centre Bearing and Prolong Life in Models with a 2 Piece Tailshaft.SEE HERE
Please use the drop down menu to select your model, lift amount and correct spring rates depending on your vehicles accessories.
Type:TritonModel:ML/MNYear:05/2006 – 2015Suspension Type: Coil Spring Front / Leaf Spring RearFront Lift: 40-45mm LiftRear Lift:25mm LiftDetail: – Monotube Remote Reservoir Shock Absorbers– Front shocks come pre-assembled for ease of installation.
COMPONENTS
Front:2x DobinsonsMRA Shock Absorbers – MRA43-A8001x Pair of Dobinsons Coil Springs2x Trundles Strut Top Mounts – TOP52x Dobinsons Bump Stop – BS59-5601x TrundlesUpper Control Arms Set –UCA2600T
Rear:1x Trundles 25mm Extended Shackle Kit – EXTSH-15
EXTRAS
If you require a rebuild kit for Shock/Strut number MRA43-A800, pleaseclick here
If you require fitting instructions for the MRA43-A800 shock, pleaseclick here
