DETAILS
Dobinsons Pre-Assembled MRA Front Lift to suit Nissan Navara D23 NP300 (Coil Rear) 2014-Onwards
NOTE:– The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm.
– You may also requireUpper Control Armsand aDiff Drop at 75mm.A 100mm Lift is achievable with extra components. This will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, and is up to the customer to set these any higher than a 75mm Lift.
Suits Coil Rear Models Only.
Looking for a quick and easy lift for yourD23 Navara? We have the answer!
Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.
Please use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.
Type: NavaraModel: D23 NP300Year: 08/2014 –Suspension Type: Coil Spring Front / Coil Spring RearFront Lift: Factory Height – 75mm LiftDetail:– 4×4 Single Cab / Dual Cab / Extra Cab Models– Monotube Remote Reservoir Shock Absorbers– These front struts are pre-assembled in our workshop and ready to go.
COMPONENTS
2x Dobinsons MRA Shocks –MRA45-A6481x Pair Dobinsons Springs2x Trundles Strut Mounts – TOP7
EXTRAS
Note: If you require fitting instructions for the MRA45-A648 shocks, please click me
