Level the stance of your 2004-2013 Ford F-150 2WD with the MaxTrac 833130 front leveling strut spacers, adding up to 3 inches of front lift.
Fabricated from steel and powder coated gray, these spacers close the front to rear rake gap common on 2WD F-150 trucks while keeping the factory strut in place.
Key Features
- MaxTrac part number 833130 for easy reference when ordering
- Fabricated steel strut spacer construction
- Delivers up to 3 inches of front lift
- Powder coated gray finish resists corrosion
- Uses the factory strut, no strut replacement required
- Sold as a pair for both front struts
Fitment
MaxTrac 833130 fits the applications listed below.
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2013 | Ford | F-150 | 2WD |
Specifications
| Detail | Value |
|---|---|
| MaxTrac Part Number | 833130 |
| Lift Height | Up to 3 in Front |
| Material | Fabricated Steel |
| Finish | Powder Coated Gray |
| Install Time | Approximately 2 Hours |
What’s Included
- MaxTrac 833130 2 front strut spacers
- Flange nuts and nylock nuts for installation
About MaxTrac
The 833130 is manufactured to MaxTrac’s tolerances, and MaxTrac Suspension designs strut spacer kits that let F-150 owners level their stance while keeping factory struts and ride quality.
Related Parts
- MaxTrac 04-18 Ford F-150 2WD/4WD 2.5in Front Leveling Strut Spacers
- MaxTrac 09-18 Ford F-150 2WD 5in Rear Fabricated Steel Lift Blocks
FAQ
How much lift does this spacer provide
It provides up to 3 inches of front lift depending on final ride height settling.
Do I need to replace my factory struts to use this spacer
No, this spacer bolts onto the factory strut, so no strut replacement is required.
Does this fit 4WD F-150 trucks
No, this spacer is designed for 2WD F-150 trucks only.
What hardware is included with this spacer
Flange nuts and nylock nuts are included for installation.
How long does installation typically take
Installation typically takes about 2 hours per side with basic hand tools.
Do the provided nuts fit factory studs
The nylock nuts fit factory studs while the flange nuts fit the studs on the spacer, since thread pitch differs between the two.
Is an alignment needed after installing this spacer
Yes, an alignment is required after installing any leveling spacer.
Will my headlights need adjustment after installation
Yes, headlight aim should be checked and adjusted after changing front ride height.
Installation
- Before beginning installation of MaxTrac 833130, raise the front of the truck and support the frame with jack stands
- Remove the front strut assembly following the factory service points
- Attach the MaxTrac strut spacer to the top of the strut using the provided hardware
- Reinstall the strut assembly, torque to spec, and complete an alignment
