DETAILS
Profender 45mm MRA Lift Kit to suit Toyota Hilux N80 2015-Onwards
Note: This kit does not suit the 2022+ Wide Track K Series Toyota Hilux SR5 Cruiser – including Rouge & GR Sport models with wider wheel track. You can view Wide Track listings here. Or if you are unsure, please email us for more details.
– Anodising colours may vary between shocks due to available stock.
Please use the drop down menu to select your model type, lift amount and the correct spring rates depending on your vehicles accessories.
Type: HiluxModel: N80Year: 2015 –Suspension Type: Coil Spring Front / Leaf Spring RearFront Lift:45mm LiftRear Lift:45mm LiftDetail: – Monotube Remote Reservoir Shock Absorbers– Front shocks come pre-assembled for ease of installation.
COMPONENTS
Front:2x Profender Front MRA Shocks – TSA4-4680A501x Pair Dobinsons Front Springs2x Trundles Strut Mounts – TOP2
Rear:2x Profender Rear MRA Shocks –MRA4-6024P2x Dobinsons Rear Leaf Springs1x Dobinsons Leaf Bush Kit – PB59-1094K2x Dobinsons U-Bolt Kits – UB59-437K
EXTRAS
Dobinsons Rear Grease-able Shackles –SK59-064Dobinsons Rear Grease-able Pins –SP59-060Trundles Spacer Diff Drop –HIL-005orTrundles Arm Style Diff Drop –DDHIL-ARMDobinsons Tail Shaft Spacer Kit (can reduce driveline vibration) –WA59-553K
Included Spring Seat Spacers
Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.
When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.
If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.
Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.
The collars are supplied separately and are not required for standard installation.
New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.
Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.
