DETAILS
Profender Pre-Assembled Front Lift with Adjustable Damping to suit Nissan Navara D23 NP300 (Leaf Rear) 2014-Onwards
NOTE: – The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm. We also strongly recommend a height adjustable coil-over if budget allows to give you the ability to make adjustments. – These shocks have 4-Stage Damping and are fixed height only.
Suits Leaf Rear Models Only.
Looking for a quick and easy lift for yourD23 Navara? We have the answer!
Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.
Please use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.
Type: NavaraModel: D23 NP300Year: 08/2014 –Suspension Type: Coil Spring Front / Leaf Spring RearFront Lift: 10mm – 40mm LiftDetail:– 4×4 Single Cab / Dual Cab / Extra Cab Models– Twin Tube Adjustable Damping Shock Absorbers– These front struts are pre-assembled in our workshop and ready to go.
COMPONENTS
2x Profender 4-Stage Damping Front Shocks –PAG-5611OA501x Pair Dobinsons Springs2x Trundles Strut Mounts – TOP7
Included Spring Seat Spacers
Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.
When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.
If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.
Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.
The collars are supplied separately and are not required for standard installation.
New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.
Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.
