QA1 1-1/8in front sway bar kit tightens up body roll on Mopar A-Body Dart, Valiant, Barracuda, and Duster chassis.
This QA1 front sway bar kit upgrades roll stiffness on Mopar A-Body chassis with a larger diameter bar than the factory setup. The bolt-on kit uses factory mounting points for a straightforward handling upgrade. QA1 part number 52833 is manufactured to meet or exceed OE specifications.
Key Features
- 1-1/8 in diameter front sway bar for increased roll stiffness
- Bolt-on installation using factory mounting locations
- Complete kit includes end links and mounting bushings
- QA1 part 52833 ships ready to install with no additional machining required
- Part 52833 is manufactured under QA1’s quality control standards in the USA
- Reference part 52833 when ordering matching components or replacement hardware
- QA1 52833 is backed by the manufacturer’s standard warranty
- Part 52833 uses QA1’s standard finish and corrosion protection process
Fitment
| Year Range | Make | Model | Notes |
|---|---|---|---|
| 1967-1968 | Dodge | Dart 270 | – |
| 1967-1976 | Dodge | Dart Base | – |
| 1967-1969 | Dodge | Dart GT | – |
| 1968-1969 | Dodge | Dart GTS | – |
| 1969-1975 | Dodge | Dart Custom | – |
| 1969-1976 | Dodge | Dart Swinger | – |
| 1969-1970 | Dodge | Dart Swinger 340 | – |
| 1971-1972 | Dodge | Dart Demon | – |
| 1971-1972 | Dodge | Dart Demon 340 | – |
| 1971-1974 | Dodge | Dart Special | – |
| 1973-1976 | Dodge | Dart Sport | – |
| 1973 | Dodge | Dart Sport 340 | – |
| 1974-1975 | Dodge | Dart Special Edition | – |
| 1974-1975 | Dodge | Dart Sport 360 | – |
| 1975-1976 | Dodge | Dart Swinger Special | – |
| 1967-1969 | Plymouth | Barracuda Base | – |
| 1970-1973 | Plymouth | Duster 340 | – |
| 1970-1975 | Plymouth | Duster Base | – |
| 1974-1975 | Plymouth | Duster 360 | – |
| 1975 | Plymouth | Duster Custom | – |
| 1976 | Plymouth | Duster Sport | – |
| 1971-1976 | Plymouth | Scamp Base | – |
| 1975 | Plymouth | Scamp Brougham | – |
| 1975-1976 | Plymouth | Scamp Special | – |
| 1967-1976 | Plymouth | Valiant Base | – |
| 1967-1969 | Plymouth | Valiant Signet | – |
| 1968-1969 | Plymouth | Valiant 100 | – |
| 1974-1975 | Plymouth | Valiant Brougham | – |
| 1975 | Plymouth | Valiant Custom | – |
| 1975 | Plymouth | Valiant Scamp | – |
Specifications
| Detail | Value |
|---|---|
| MPN | 52833 |
| Diameter | 1-1/8 in |
| Position | Front |
What’s Included
- 1 front sway bar
- End links and mounting bushings
- Mounting brackets
About QA1
QA1 has manufactured precision suspension and chassis components in the United States since 1969, supplying racers and performance enthusiasts with rebuildable ball joints, control arms, sway bars, trailing arms, and chassis stiffening products engineered for consistent handling under load.
Related Parts
- QA1 64-72 GM A-Body Anti-Hop Bars – Rear
- QA1 65-79 Ford F100 Front Sway Bar – 1-3/8in
- QA1 64-72 GM A-Body Front Sway Bar – 1-1/4in
- QA1 63-87 Chevrolet C10 Sway Bar Kit 1-3/8in – Front
FAQ
Will this fit my vehicle exactly as listed
Check the fitment table above for the exact years, make, and model this part covers. Chassis and suspension parts often differ by body style within the same model line, so confirm your specific submodel and factory suspension type before ordering.
What is included in the box
This listing includes the component shown in the title. Mounting hardware is included only when stated in the specifications table above. Some installations require separate spring adapters or companion parts noted in the specifications.
Do I need any special tools to install this
Standard hand tools, a floor jack, and jack stands cover most installations. A spring compressor and ball joint separator are recommended for control arm and ball joint work, and a torque wrench is required to bring fasteners to spec.
Is this a direct bolt-on replacement
Yes, this part is engineered to bolt into the factory mounting locations on the listed applications. No cutting, drilling, or welding is required unless specifically noted.
Can I install this myself or do I need a professional
Most owners with intermediate mechanical skills and a lift or jack stands can complete this installation using common tools. If you are not experienced with suspension or chassis work, a certified shop is recommended.
Does this work with my stock suspension components
Compatibility with factory or aftermarket springs, shocks, and companion parts depends on the specific kit. Review the specifications table above for any required companion parts before ordering.
Does this come with a warranty
This part is covered by the manufacturer’s standard warranty against defects in materials and workmanship. Retain your receipt as proof of purchase.
Will this affect my vehicle’s ride height or alignment
Chassis and suspension components can change ride height, caster, or camber depending on design. Have your alignment checked after installation to keep tire wear and handling within spec.
Installation Instructions
- Raise and support the vehicle by the frame and remove the front wheels if needed for access
- Disconnect the sway bar end links from the control arms
- Remove the factory sway bar mounting bushings and brackets from the frame
- Position the QA1 sway bar and install the new mounting bushings and brackets
- Reconnect the end links to the control arms and torque to specification
- Recheck all fasteners after the first drive
