A Ceramic Compound Built For Daily Driving And Track Days
Most performance pads force a tradeoff between quiet street manners and confident stopping power under load. The Wilwood BP-22 pad set bridges that gap with an advanced ceramic-based formula built for TX6R Tactical Extreme six-piston calipers, delivering smooth daily engagement that comes alive during autocross runs, HPDE track days, and towing.
Key Features
- Advanced ceramic-based BP-22 compound, replacing the older BP-Q compound
- Purpose-built for Wilwood TX6R Tactical Extreme six-piston radial mount calipers
- 10120-22 pad plate, .755in overall thickness
- Reduced noise, dust, and rotor wear compared to earlier street compounds
- Consistent pedal feel from cold engagement through sustained high heat
- Compatible with iron, steel, stainless, and titanium rotors
Specifications
| Detail | Value |
|---|---|
| MPN | 150-22-10120K |
| UPC | 889545128062 |
| Compound | BP-22 |
| Pad Plate | 10120-22 |
| Thickness | .755in |
| Fits Calipers | TX6R Tactical Extreme, 6 piston, forged aluminum |
| Rotor Compatibility | Iron, steel, stainless, titanium |
| Warranty | Manufacturer limited warranty against defects |
What’s Included
- Set of 4 BP-22 compound brake pads (one axle set)
About Wilwood
Wilwood Engineering has manufactured performance brake components since 1977. BP-22 is Wilwood’s newest SmartPad compound, engineered as a daily-driven street pad that still performs when the pace picks up on track or under load.
Related Parts on Our Site
- Wilwood TX6R front big brake kits
- Wilwood stainless steel brake line kits
- Wilwood brake fluid and bleeding accessories
FAQ
What is the 150-22-10120K?
The Wilwood 150-22-10120K is a set of four BP-22 ceramic-based compound brake pads on the 10120-22 pad plate, designed for TX6R Tactical Extreme six-piston calipers.
Which calipers use this pad set?
This pad set fits Wilwood TX6R Tactical Extreme forged aluminum six-piston radial mount calipers.
What driving is the BP-22 compound designed for?
BP-22 is engineered as a dual-sport street pad suited for daily driving, autocross, occasional track days, and light-duty towing.
How thick are these pads?
Each pad in this set measures .755in in overall thickness, matching the 10120-22 pad plate specification.
Are BP-22 pads noisy or dusty compared to other compounds?
No, BP-22 uses an advanced ceramic-based formula specifically designed to reduce noise, dust, and rotor wear compared to earlier compounds.
What rotor materials work with BP-22 pads?
BP-22 pads are compatible with iron, steel, stainless steel, and titanium rotors within their intended operating range.
How many pads are included in this set?
This set includes 4 pads, enough for one axle.
Can I use BP-22 pads for towing?
Yes, BP-22 is rated for light-duty towing applications in addition to street and light track use.
Install Instructions
- Raise and support the vehicle, then remove the wheel
- Remove the TX6R caliper from its mounting bracket without disconnecting the brake line
- Remove the pad retention hardware and slide out the old pads
- Compress the caliper pistons to make room for the new pad thickness
- Install the new BP-22 pads and reinstall the retaining hardware
- Reinstall the caliper onto the bracket and torque mounting bolts to spec
- Reinstall the wheel and pump the brake pedal to seat the new pads
- Bed in the new pads following Wilwood’s recommended bedding procedure before hard use
